Function; Adjusting The Flow Time; Adjusting The Range; Setting The Hygiene Flush - Franke AQUA401 Notice De Montage Et De Mise En Service

11.18 Set the flushing flow.
11.19 Put the cover plate in place and hang on the supporting frame behind the strap.
11.20 Secure the cover plate using the grub screw.

12. Function

12.1 Stand in front of the urinal for at least 10 seconds.
12.2 Leave the urinal.
• The water will flow.
• The water flow stops automatically once the preset flow time has expired.
☞
An automatic flushing function after 24 hours of non-use has been factory-set.

13. Adjusting the flow time

The flow time can be adjusted with an ECC2 function controller via the web appli-
cation.

14. Adjusting the range

The range can be adjusted using an ECC2 function controller via the web appli-
cation.

15. Setting the hygiene flush

The hygiene flush can be adjusted with an ECC2 function controller via the web
application.

16. Adjusting the flushing flow

16.1 Remove the cover plate (see
16.2 Set the flushing flow.
+ increase flushing flow
– decrease flushing flow
16.3 Secure the cover plate.
Chapter 17.).
- 8 -