The appliance cannot be switched on or is on and
cannot be operated; the
display.
The appliance does not heat up;
display.
There is a "pop" noise during cooking.
Maximum Operating Time Exceeded
Your appliance automatically ends the operation if no
duration has been set and the setting has not been
changed for 24 hours.
The actual cooking time until the operation is stopped
automatically varies according to the selected settings.
A message appears on the display on the appliance to
say that the operation is being ended automatically.
Afterwards, the operation is stopped.
To use the appliance again, first switch it off. To switch
the appliance back on set the required operation.
Steam Oven Cavity Bulbs
To light the interior of your steam oven cavity, your
appliance has one or more long-life LED bulbs.
However, if ever an LED bulb or the bulb's glass cover
fails, call Customer Service. The lamp cover cannot be
removed.
Product Rating Label
The rating label shows the model number and the FD
number (production number/product's unique identifier)
of your oven. The location of the rating label is shown in
the image below.
Rating Label Location
A Rating Label
symbol is shown on the
‚
is shown on the
6
The panel lock is activated. Press and hold the TIMERS touch
button until the
symbol goes away.
‚
Demo mode is activated in the basic settings. Turn demo
mode to OFF in the settings menu.
Cold/warm effect with food, caused by the steam.
Model Number and FD Number
The model number and the FD number of your appliance
are found on the rating label. Make a note of these
numbers in the space below to save time in the event
your appliance requires service.
Model #
Thermador
Customer Support
Keep your invoice or escrow papers for warranty
validation if service is needed.
How to Obtain Service or Parts
To reach a service representative, see the contact
information at the front of the manual. Please be
prepared with the information printed on your product
rating label when calling.
FD #
800-735-4328
39