Cleaning Your Oven; Suitable Cleaning Agents - Thermador Professional Série Guide D'utilisation Et D'entretien

FCC COMPLIANCE STATEMENT
CAUTION
9
Changes or modifications not expressly approved
could void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
1.
This device must accept any interference received,
2.
including interference that may cause undesired
operation.

Cleaning Your Oven

With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your oven.

Suitable Cleaning Agents

To ensure that the different surfaces are not damaged by
using the wrong cleaning agent, follow the information in
the following table. Depending on the appliance model,
not all of the areas listed may be on/in your appliance.
NOTICE: Surface damage!
Do not use any
Harsh or abrasive cleaning agents
▯
Cleaning agents with a high alcohol content
▯
Hard scouring pads or abrasive cleaning sponges
▯
High-pressure cleaners or steam cleaners
▯
Special cleaners for cleaning the appliance while it is
▯
hot
Wash new soft sponges and cloths thoroughly before
use.
Tip: Recommended cleaning and care products can be
purchased through Customer Service. Observe the
respective manufacturer's instructions.
WARNING
9
RISK OF BURNS
The appliance becomes very hot. Never touch the
hot inside surfaces of the oven interior or heating
elements. Always allow the appliance to cool down.
Keep children away.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada license-
exempt RSS standard(s).
Operation is subject to the following two conditions:
This device may not cause interference, and
1.
This device must accept any interference, including
2.
interference that may cause undesired operation of the
device.
Operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-
channel mobile satellite systems.
Notes
Slight differences in color on the front of the appliance
▯
are caused by the use of different materials, such as
glass, plastic and metal.
Shadows on the door panels, which look like streaks,
▯
are caused by reflections made by the interior lighting.
Enamel is baked on at very high temperatures. This
▯
can cause some slight color variation. This is normal
and does not affect operation.
33