Preheating Bar
As soon as a new heating mode is started, the
preheating bar appears on the display. The preheating
bar indicates the temperature increase in the oven cavity.
When the oven is fully preheated, a sound signal will
occur.
INFO Touch Button
If the INFO touch button lights up, important information
regarding the mode you are using is available. This may
include for example recommendations on suitable
cookware or how to prepare food for a safe cooking
result. When you touch the INFO touch button, the
information is displayed for a few seconds.
To exit the INFO text immediately, touch the INFO touch
button or the display.
Sounds
The appliance uses various sound signals during
operation. A sound signal can be heard whenever you
use a touch button or touch field, or when an operation is
started or finished. You can adjust the volume of these
sounds in the Settings menu. ~ "Adjust Basic Settings"
on page 16
Changing or Cancelling the Appliance
Operation
Changing the appliance operation
To set a different temperature or a different heating
1.
mode use the temperature or function selectors.
To change any other settings, touch the display area
2.
for the setting that should be changed.
Swipe to the left or right to change the setting.
3.
After a few seconds the oven continues with the
4.
changed settings.
Note: The cooling fan may continue to run while an
operation is interrupted.
Cancelling the appliance operation
Turn the temperature selector and the function selector
to OFF to cancel the appliance operation.
Fast Preheat
With "Fast Preheat", you can shorten the preheat time
required for some heating modes.
Fast Preheat is available for the following modes:
True Convection
▯
Convection Bake
▯
Bake
▯
Roast
▯
Convection Roast
▯
To achieve an even cooking result, do not place your
food or accessories into the oven cavity until
"Fast Preheat" is complete.
Notes
If the FAST PREHEAT touch button is lit, the function
▯
can be activated.
To deactivate the function before it has finished, touch
▯
the FAST PREHEAT touch button.
Activating the "Fast Preheat" function
Set a heating mode and temperature.
1.
Touch the FAST PREHEAT touch button to activate the
2.
function.
The
symbol appears on the display.
°
Once the set temperature has been reached, the
3.
"Fast Preheat" function switches itself off automatically.
The
symbol disappears from the display. Place the
°
food in the oven cavity.
Panel Lock
Your appliance is equipped with a panel lock so that it
cannot be switched on or a setting cannot be changed
accidentally.
Activating and Deactivating
The appliance has to be turned off.
Touch and hold the TIMERS touch button for
1.
approximately 4 seconds until "Panel Lock activated"
is displayed. The lock is activated. The
displayed in the top left corner of the display.
Touch and hold the TIMERS touch button for
2.
approximately 4 seconds until "Panel Lock
deactivated" is displayed.
The lock is deactivated.
symbol is
1
19