Turning The Power On; Turning The Power Off - Sharp LL-151-3D Mode D'emploi

Connecting the monitor and turning the monitor on and off

Turning the power on

1. Press the monitor's power button.
2. Turn on the computer.
Press power button.
When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed. (After power is turned on, it may take
a little time until the screen is displayed.)
Notes:
- When using an analog signal, perform an
automatic screen adjustment under the following
conditions (p.17):
- Using the monitor for the first time.
- After having changed the system settings
during use.
- When using the monitor with a digital
connection, automatic screen adjustment is
unnecessary.
- Depending on the type of computer or OS, you
may need to install the monitor set-up
information on your system. (p.30)
- When connecting to a notebook, if the notebook
computer's screen is set to display at the same
time, the MS-DOS screen may not display
properly. In this case, change the setting to
display only the LCD monitor.

Turning the power off

1. Turn the computer off.
2. Press the monitor's power button.
The power LED will disappear.
Turn on the
computer power
supply.
Turn the computer
off.
ON
If the monitor is not going to be used for a long
period of time, be sure to unplug it from the AC
outlet.
15
Press power button.
OFF