Supplied Software - Sharp LL-151-3D Mode D'emploi

Supplied software

Install the following software from the supplied
CD-ROM as necessary after installing the SHARP
Stereo Display.
Note:
- If you want to install the following software,
install the SHARP Stereo Display first.
SHARP Smart Stereo Photo Editor
Supported OS: Windows XP (English version)
Operation in other language versions is not
guaranteed.
This software supports SHARP 3D Technology. It
converts images, taken with a digital camera, etc.,
using a stereo lens adapter, into a format which
can be displayed in 3D with this monitor.
Available style is Side-by-Side and Left/Right
Independent.
Side-by-Side
Left
Right
image image
How to install
If Microsoft.NET. Framework is not installed in your
computer, install it before installing this software.
In the CD-ROM, double click on [dotnetfx.exe] in
the [3D], [3DSOFT], [dotnet], [English] folder, and
follow the instructions displayed on the screen to
complete the procedure.
1. Load the supplied CD-ROM into the CD-ROM
drive of the computer.
2. Double click on [PhotoEditor.exe] in the [3D],
[3DSOFT], [SLE], [English] folder.
3. Follow the instructions displayed on the screen
to complete the procedure.
How to use
Refer to [SHARP SmartStereo Photo Editor User
Guide] or [SHARP SmartStereo Slide Show User
Manual], by clicking on the [Start] button, and
choosing [SHARP SmartStereo Photo Editor] from
[All Programs].
Preparation for 3D display
Left/Right independent
Right
Left
image image
(File1)
(File2)
SHARP Smart Stereo Camera Calculator
Supported OS: Windows XP (English version)
Operation in other language versions is not
guaranteed.
This software calculates attribute values to display
an image taken with a stereo camera on the
screen of this monitor.
How to install
1. Load the supplied CD-ROM into the CD-ROM
drive of the computer.
2. Double click on [CamCalc.exe] in the [3D],
[3DSOFT], [SLE], [English] folder.
3. Follow the instructions displayed on the screen
to complete the procedure.
How to use
Refer to [User Guide] by clicking on the [Start]
button, and choosing [SHARP SmartStereo
Calculator] from [All Programs].
22