Specifications - Sharp LL-151-3D Mode D'emploi

Product specifications
Model name
LL-151-3D
LCD display
38 cm measured diagonally TFT 3D LCD module
Resolution (max.)
XGA 1024 x 768 pixels
(In 2D mode only. In 3D mode, the actual
resolution is half because the horizontal pixels
are divided between right and left eyes.)
Displayable colors (max.)
Approx.16.19 million colors (6 bit + FRC)
Brightness (max.)
2D mode: 370 cd/m 2
3D mode: 140 cd/m 2
(The screen brightness deteriorates over time.
Constant brightness cannot be maintained.)
Dot pitch
0.297 (H) x 0.297 (V) mm
Contrast ratio
500:1
Angle of visibility (2D mode)
Left-right 130°; up-down 115°
(contrast ratio > 10)
Screen display size
Horizontal 304.1 mm x Vertical 228.1 mm
Video signal
Analog: Analog RGB (0.7 Vp-p) [75Ω]
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-)
Expansion compensation
Digital scaling (Enlarges VGA/SVGA etc. to full
screen size.)
Plug & Play
VESA DDC2B compatible
Power management
VESA: based on DPMS
DVI: based on DMPM
Speaker output
1 W + 1 W
Input signal terminal
Digital/Analog: DVI-I 29 pin
PC connection terminal for 2D/3D selection
USB
Audio input terminal
Mini stereo jack
Headphone terminal
Mini stereo jack
Height adjustment
Adjustment range: approx. 60 mm
Screen tilt
Upward approx. 0-30°; downward approx. 0-5°
Screen swivel
Approx. 45° from the center to the left and
approx. 45° from the center to the right.

Specifications

Power supply
100-240 VAC, 50/60 Hz (Uses special AC
adapter, type NL-A56J of Sharp Corporation)
Temperature of operating environment
5-35°C
Power consumption
25 W (with no audio input)
(29 W maximum, 2 W when in power-saving
mode) (Uses special AC adapter)
Dimensions
Approx. 352 (W) x 185 (D) x 370-430 (H) mm
Weight
Approx. 5.3 kg (approx. 3.4 kg excluding stand)
(excluding signal cable and AC adapter)
26