Preparation For 3D Display; How To Install Sharp Stereo Display - Sharp LL-151-3D Mode D'emploi

This product is a 3D-ready LCD monitor which
allows users to see stereoscopic images and
videos without using special glasses. You can
switch between 3D mode for stereoscopic (3D)
display and 2D mode for conventional (2D)
display.
Basic principle
In 3D mode, the parallax barrier divides light so
that the right and left eyes of a viewer receive
different lights. Consequently, the viewer can see
stereoscopic images and videos.
In 2D mode, the parallax barrier does not divide
light. Since the right and left eyes of a viewer
receive the same light, the viewer sees
conventional flat images.
parallax
barrier
OFF
backlight
Requirements for displaying 3D images
Applicable software for displaying 3D images
- Software which supports SHARP 3D Technology
- Other software which supports 3D display
Operating environment for 3D display
- The operation of the software supporting SHARP
3D Technology is guaranteed only on Windows
XP (English version).
Operation in other language versions or other
operating systems is not guaranteed.
- A digital connection is recommended for
connecting to a computer.
- The required operating environment may vary
depending on the software. Be sure to confirm
the operating environment of your software.
Notes:
- SHARP 3D Technology was originally
developed by SHARP to provide a 3D display on
a computer screen.
- If your eyesight greatly differs between the right
and left eye, or if you watch the screen mainly
with a single eye, you may not see stereoscopic
images. Images may or may not be able to see
stereoscopically depending on the displayed
contents.
- 3D effect varies depending on the person.

Preparation for 3D display

(The light does not pass)
ON

How to install SHARP Stereo Display

Supported OS: Windows XP (English version)
Operation in other language versions is not
guaranteed.
To display 3D images with this monitor using the
software supporting SHARP 3D Technology, you
must install the following software on your
computer and connect the computer to the monitor
with a USB cable.
- Sharp Stereo Display Driver
(Driver to control the monitor's display mode
through the USB port)
- Sharp Stereo Display Manager
(Software to manage the monitor's display mode
according to application status)
- Sharp Stereo Display Component
(Software to display 3D images properly with
this monitor)
Start installation with the USB cable disconnected.
For software installation and USB connection
procedures, refer to [ReadmeE.txt] in the [3D],
[SSD], [English] folder in the supplied CD-ROM.
Notes:
- Be sure to follow the installation and connection
procedures described in [ReadmeE.txt].
Otherwise, the installation may fail.
USB cable
21
USB port