Connecting A Usb Device; Turning The Power On - Sharp LL-T1811W Mode D'emploi

Masquer les pouces Voir aussi pour LL-T1811W:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Connecting the monitor and turning the monitor on and off

Connecting a USB device

This monitor can be used with hubs which use the
USB standard (Rev. 1.1).
Downstream (2 ports)
USB devices such as keyboard and mouse can be
connected here. Up to 100mA of power is able to be
supplied per port. Devices requiring more than
100mA cannot be connected.
Upstream (1 port)
USB compatible computers and self-powered hubs
can be connected. (Bus-powered hubs cannot be
connected.)
Notes:
-
If a USB cable is required, please use the one
included.
-
Before connecting, ensure that the shape of the
USB cable connector is correct.
-
For information regarding the USB function (such
as set-up) please refer to the operation manual of
the computer to be connected.
-
Some computers, OS and other devices may not
be able to be activated. To ascertain a certain
device's USB compatibility, please contact the
manufacturer of the device.
1. Remove the cover.
(Rear View)
2. Connect the USB cable.
USB port:
Downstream (2 ports)
USB port:
Upstream (1 port)
3. Replace the cover.

Turning the power on

1. Press the monitor's power button.
2. Turn on the computer.
The power LED will be lit green, and the screen
will display an image.
Changing between input terminals
Use the INPUT button to switch between signal input
terminals.
DVI-I input terminal
Cover
Notes:(when using an analog signal)
-
If using the monitor for the first time or after
having changed the system settings during use,
perform an automatic screen adjustment (p. 19).
-
When connecting to a notebook, if the notebook
computer's screen is set so that it is displaying at
the same time, the MS-DOS screen may not be
able to display properly. In this case, change the
settings so that only the monitor is displaying.
14
Turn monitor on
Press power button
Analog signal input terminal
INPUT-1
INPUT
DVI-I input terminal
(digital)
INPUT-2 (DIGITAL)
Turn on device to
which monitor is
connected
(analog)
INPUT-2 (ANALOG)

Publicité

Table des Matières
loading

Table des Matières