Product Description - Sharp LL-T1811W Mode D'emploi

Control Panel
1. INPUT button
2. MENU button
3. SELECT button
4. buttons
5. Power LED
6. Power button
Adjusting the angle of the monitor
Lightly holding both sides of the monitor, adjust
it to a suitable viewing angle.
CAUTION!
- Pressure from hands on the LCD panel could
cause damage.

Product description

Front view
1 2 3 4
To switch between the signal's input terminals. (Analogue signal input
terminal ↔ DVI-I input terminal)
This button is used to pop-up, select and close the OSD Menu.
This button is used to select menu options when the OSD Menu is
displayed.
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the value of a selected
option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness .
This LED is lit green when in use and orange when in power-saving
mode.
Pressing this button turns the power on. (After turning the power on, it
may take a little time before the screen displays.)
Press the button again to turn the power off.
10
5 6