Product Description - Sharp LL-T18A1 Mode D'emploi

1 2
1. INPUT button .............................. To switch between the signal's input terminals. (Analog RGB input
2. MENU button ............................... This button is used to pop-up, select and close the OSD (On Screen
3. button ...................................... This button is used to select menu options when the OSD Menu is
4. buttons ................................ When the OSD Menu is displayed:
5. Power LED .................................. This LED is lit green when in use and orange when in power-saving
6. Power button
7. Power terminal
8. DVI-D input terminal ................... Use this when connecting to the computer's digital RGB output
9. Analog RGB input terminal ......... Use this when connecting to the computer's analog RGB output
10. Security lock anchor ................... By connecting a security lock (commercially available) to the security
11.Ventilation openings .................... Note: Never block the ventilation openings as this may lead to

Product description

3 4 5 6
terminal ↔ DVI-D input terminal)
Display) Menu.
displayed.
These buttons are used to select an option or adjust the value of
the selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness .
mode.
terminal.
It can be connected to a computer with a DVI-compatible output
terminal (DVI-D24 pin or DVI-I29 pin) and which has SXGA output
ability. (Depending on the computer to be connected, correct display
may or may not be possible.)
In order to connect, it is necessary to purchase a Digital signal
cable.(Model name: NL-C01E)
terminal.
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
overheating inside the monitor and result in malfunction.
11
7 8 9
9
11
11
10