Product Description - Sharp LL-H1813 Mode D'emploi

2 3
1
1. INPUT button
To switch between the signal's input terminals. (Input terminal 1 ↔ Input terminal 2)
2. MENU button
This button is used to pop-up, select and close the OSD (On Screen Display) Menu.
3. SELECT button
This button is used to select menu options when the OSD Menu is displayed.
4. buttons
When the OSD Menu is displayed:
These buttons are used to increase or decrease the value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness .
5. Power button
6. Power LED
This LED is lit green when in use and orange when in power-saving mode.
7. USB port (downstream: 2 ports)
8. USB port (upstream: 1 port)
9. DVI-I input terminal
The computer's digital RGB output terminal or analog RGB output terminal can be connected here.
For a digital signal input, it can be connected to a computer with a DVI-compatible output terminal
(DVI-D24 pin or DVI-I29 pin) and which has SXGA output ability. (Depending on the computer to be
connected, correct display may or may not be possible.)
For digital connection, a digital signal cable (sold separately-model name: NL-C01E) is required.
10. Security lock anchor
By connecting a security lock (commercially available) to the security lock anchor, the monitor is fixed
so that it cannot be transported. The security slot works in conjunction with Kensington Micro Saver
Security Systems.
11. Power terminal
12. Main power switch
13. Headphone terminal
Headphones (commercially available) can be connected here.
14. Audio input terminal
A computer's audio output terminal can be connected here. The audio cable included should be used.
15. Ventilation openings
Note: Never block the ventilation openings as this may lead to overheating inside the monitor and
result in malfunction.

Product description

13
14
4 5 6
10
8 9 10
7
15
12
11