Height Adjustment, Angle Adjustment, Rotation (Long Height/Width) - Sharp LL-H1813 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Height adjustment, angle adjustment, rotation
CAUTION!
- Pressure from hands on the LCD panel could
cause damage.
- Be careful not to allow your fingers to be
pinched.
Height adjustment
Adjust to an easy to view height.
Angle adjustment
Adjust to an easy to view angle.
5
(long height/width)
80mm
30
45
45
Rotation (long height/width)
The display can be rotated for a long height or
width to suit the displayed content.
- Before rotating, move the display to its
uppermost position. If the display is rotated while
it is set low, it will contact the stand and could
lead to damage.
- The display can only be rotated through a range
of 90°. Applying excessive force may cause
malfunction.
- Do not apply excessive force when the cable is
connected.
To set to long height
Gently turn in the clockwise direction (to 90°).
To set to long width
Gently turn in the counterclockwise direction (to
90°).
Note:
- The orientation of the display can be changed
using Pivot Software. (p. 32)
11

Publicité

Table des Matières
loading

Table des Matières