DeWalt DCN693 Guide D'utilisation page 3

Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Fig. A
6
9
8
NOTICE: NEVER use lubricants or cleaning solvents on or inside the tool. If not avoided,
adverse affects to tool performance and life may result.
Trigger
1
Trigger lock-off
2
Depth adjustment wheel
3
Low battery & jam/stall indicator lights
4
Stall release lever
5
Contact trip
6
Magazine
7
Pusher latch
8
3
4
Sequential and RapidCycle™ switch
9
Rotating rafter/belt hook
10
On-board hex wrench
11
Battery Pack
12
Metal connector tip
13
Nail support lever
14
Nail length selector switch
15
5
5
2
10
12

if you have any questions or comments about this or any
D WALT tool, call us toll free at:
e
1–800–4-D
7
1
11
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
WALT (1–800–433–9258).
e
English
13
14
15
1