Installation And Electrical Connection - Wilo Stratos Notice De Montage Et De Mise En Service

English
Menu structure: There are three menu levels. The levels beneath the display of
the basic settings are always accessed from 1 level by pressing the control
button
for different lengths of time.
Level 1 – Status display (display of the operating state)
Level 2 – Operation menu (setting the basic functions):
• Pressing the control button longer than 1 s
Level 3 – Options menu (additional settings):
• Pressing the control button longer than 6 s
NOTE: After 30 s without any new entry being made, the display jumps back to
Level 1 (display of the operating state). Temporary, non-acknowledged
modifications are discarded.

7 Installation and electrical connection

Installation and electrical work in compliance with any local codes and by
qualified personnel only!
DANGER! Electrical shock hazard!
Dangers caused by electrical energy must be excluded.
National Electrical Codes, local codes and regulations must be followed.
WARNING! Bodily injury!
Existing regulations for the prevention of accidents must be observed.
7.1 Installation
WARNING! Risk of injury!
Incorrect installation can result in injuries.
• There is a crushing hazard
• There is a risk of injury due to sharp edges/burrs. Wear appropriate
protective clothing (i.e. safety gloves)!
• There is a risk of injury hazard due to the pump/motor falling. Use suitable
lifting gear to secure the pump/motor against falling.
CAUTION! Risk of damage to property!
Incorrect installation can result in damage to property.
• Have installation work performed by qualified personnel only!
• Observe national and regional regulations!
• When the pump needs to be transported, it may be carried only by the motor/
pump housing. Never at the module/terminal box or pre-assembled cable.
• Installation within a building: install the pump in a dry, well ventilated and
frostresistant room.
14 Subject to technical alterations! WILO SE 03/2016