HASE Akaba Mode D'emploi page 82

Akaba Standard
The Akaba, certifi ed in compliance with DIN-EN 13240 : 2001 + A2 2004 and Art. 15
a B-VG (Austria), can only be operated when the fi re box is closed; more than one device
can be connected to the chimney.
VKF-No.: 15107; Inspection Report No. (A): FSPS-Wa-1366-A
Akaba direct vent stove
The Akaba direct vent stove, certifi ed in compliance with DIN-EN 13240, DIN 18897-1
and Art. 15 a B-VG (Austria), can only be operated when the fi re box is closed; needs
its own separate chimney.
VKF-No.: 15107; Inspection Report No. (A): FSPS-Wa-1366-A
Conforms with the DIBT (Deutschen Institut für Bautechnik/German
Institute for Building Technology) approval criteria for direct vent fi replaces
for solid fuels.
DIBT approval number: Z-43.12-186 Typ
The following data applies to the chimney characteristics in accordance with EN 13384-1 / 2:
Combustion Values
Nominal Thermal Output
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
CO content at 13% O2
Effi ciency
Particulate
Required combustion air volume at a max. supply pressure of 4Pa
82
Depending on the insulation of the building, the nominal thermal output of 4 kW indicated
on 10 - 50 m² (subject to change)
Dimensions:
Stove
Fire box
Weight
Connections:
Height for top installation
Height for the inst. of Hase air system*
Fire Box Opening
Flue pipe diameter
FC41x und FC51x
Pipe diameter of Hase ventilation system*
For separate air supply in low-energy houses and insuffi cient combustion air supply in the
*
room where the stove is installed (Akaba direct vent stove)
Wood
4 kW
4 g/s
350 ˚C
10 Pa
1221 mg/m³
82 %
34 mg/m³
11 m³/h
Height Width
111,5 cm 41 cm
43 cm 20 cm
118 kg
Depth
41 cm
26 cm
108 cm
37,5 cm
775 cm²
15 cm
10 cm