Setting The Speakers (Speaker Settings) - Sony HT-RT5 Manuel D'instructions

7
Press .
[Auto Calibration] starts.
The system adjusts the speaker
settings automatically.
Be quiet during the measurement.
Notes
• Before measurement, make sure that
the speaker power is on, and confirm
the position of the wireless speakers.
Auto Calibration
• While [
do not operate the system.
8
Confirm the result of [Auto
Calibration].
The distance and level for each
speaker appear on the TV screen.
Note
• If measurement fails, follow the
message then retry [Auto Calibration].
9
Press / to select [OK] or [Cancel],
then press .
The measurement is OK.
Disconnect the calibration mic, then
select [OK]. The result is
implemented.
The measurement is not OK.
Follow the message, then select [OK]
to retry.
Setting the Speakers
(Speaker Settings)
To obtain optimum surround sound, set
the speakers' distance from your listening
position.
1
] is in progress,
2
3
4
5
6
 [Distance]
When you move the speakers, be sure to
set the parameters of the distance from
the listening position to the speakers.
You can set the parameters from 0 to
23 feet (0.0 to 7.0 meters).
[Front Left/Right] 10 ft/3.0 m: Set the
front speaker distance.
[Center] 10 ft/3.0 m: Set the center
speaker distance.
[Surround Left/Right] 10 ft/3.0 m: Set the
surround speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the
subwoofer distance.
Tip
• You can change the unit of measurement
(feet or meters) by pressing the color
button (RED).
Press HOME.
The home menu appears on the TV
screen.
Press / to select
Press / to select [Audio Settings],
then press .
Press / to select [Speaker
Settings], then press
Press /// to select the item,
then press .
Press / to adjust the parameter.
Check the following settings.
[Setup].
.
41
US