[Bluetooth Settings] - Sony HT-RT5 Manuel D'instructions

 [Sound Effect]
You can turn on or off the system's sound
effects (SOUND FIELD setting (page 10)).
For a 2-channel source, you can select
[Dolby Pro Logic], [DTS Neo:6 Cinema], or
[DTS Neo:6 Music] to simulate surround
sound.
[Sound Field On]: Enables the surround
effect of the sound field (page 10) and the
football mode (page 10).
[Dolby Pro Logic]: The systems simulates
surround sound from 2-channel sources
and outputs sound from all speakers (5.1
channel) (Dolby Pro Logic decoding).
[DTS Neo:6 Cinema]/[DTS Neo:6 Music]:
The system simulates surround sound
from 2-channel sources and produces
multi-channel sound (DTS Neo:6 Cinema/
DTS Neo:6 Music mode decoding).
[2ch Stereo]: This system outputs the
sound from the front left/right speakers
and subwoofer only.
Multi-channel surround formats are
downmixed to 2-channel.
[Off]: The sound effects are disabled. You
can hear sound as it is recorded.
 [Speaker Settings]
To obtain optimum surround sound, set
the speakers' distance from your listening
position. For details, see "Setting the
Speakers" (page 41).
 [Auto Calibration]
You can calibrate the appropriate
settings automatically. For details, see
"Calibrating the Appropriate Speaker
Settings Automatically" (page 40).

[Bluetooth Settings]

 [Bluetooth Mode]
You can enjoy content from a BLUETOOTH
device by using this system or listen to
sound from this system by using
BLUETOOTH receiver such as
headphones.
[Receiver]: This system is in receiver
mode, which enables it to receive and
output audio from the BLUETOOTH
device.
[Transmitter]: This system is in transmitter
mode, which enables it to send audio to
the BLUETOOTH receiver. If you switch the
input of the system, "BT TX" appears on
the front panel display.
[Off]: BLUETOOTH function is turned off
and you cannot select the [Bluetooth
Audio] input.
Note
• You can connect to a BLUETOOTH device by
using the One-touch function even if you
have set [Bluetooth Mode] to [Off].
 [Device List]
Displays a list of paired and detected
BLUETOOTH devices (SNK device) when
[Bluetooth Mode] is set to [Transmitter].
 [Bluetooth Standby]
You can set the [Bluetooth Standby] so
that the system can be turned on by a
BLUETOOTH device even when the
system is in standby mode. This function
is only available when you set [Bluetooth
Mode] to [Receiver] or [Transmitter].
[On]: The system turns on automatically
when you establish a BLUETOOTH
connection from a paired BLUETOOTH
device.
[Off]: Off
 [Bluetooth Codec - AAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver] or
[Transmitter].
[On]: Enable AAC codec.
[Off]: Disable AAC codec.
Note
• You can enjoy high-quality sound if AAC is
enabled and your device supports AAC. If
you cannot listen to AAC sound with your
device, select [Off].
27
US