Listening To Sound By Transmitting To A Bluetooth-Compatible Receiver - Sony HT-RT5 Manuel D'instructions

Masquer les pouces Voir aussi pour HT-RT5:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Listening to Sound by
Transmitting to a
BLUETOOTH-compatible
Receiver
You can listen to sound of the source
playing via this system by using a
BLUETOOTH-compatible receiver (such as
headphones).
1
Press HOME.
The home menu appears on the TV
screen.
2
Select
[Setup] -
Settings] from the home menu.
3
Select [Bluetooth Mode].
4
Select [Transmitter].
5
Turn on BLUETOOTH function on the
BLUETOOTH receiver.
6
Select the BLUETOOTH receiver's
name from the [Device List] in
[Bluetooth Settings] (page 27).
When the BLUETOOTH connection is
established, the indicator (blue) lights
up.
If you cannot find your BLUETOOTH
receiver's name in the [Device List],
select [Scan].
Note
• The [Device List] screen appears after a
confirmation dialog when you change
[Bluetooth Mode] to [Transmitter] from
other modes.
7
Return to the home menu and
select the desired input.
"BT TX" appears in the front panel
display, and the sound is output from
the BLUETOOTH receiver.
No sound is output from speakers of
the system.
14
US
8
Notes
• You may not be able to adjust the volume
• [Screen mirroring], [Bluetooth Audio] and
[Bluetooth
• When input of [Bluetooth Audio] or [Screen
• You can register up to 9 BLUETOOTH
• The system can display up to 15 detected
• You cannot change the sound effect or
• Some content cannot be output due to
• Playback on the BLUETOOTH receiver may
• No sound is output from speakers and
Adjust the volume.
Adjust the volume level of the
BLUETOOTH receiver first. When
connected with a BLUETOOTH
receiver, volume level of the
BLUETOOTH receiver can be
controlled with VOLUME +/– on the
Bar Speaker and  +/– on the
remote control.
level depending on the BLUETOOTH
receiver.
Home Theatre Control function are
disabled when the system is in transmitter
mode.
mirroring] is selected, you cannot set
[Bluetooth Mode] to [Transmitter]. You
cannot switch it with RX/TX on the remote
control neither.
receivers. If a 10th BLUETOOTH receiver is
registered, the least recently connected
BLUETOOTH receiver will be replaced by the
new one.
BLUETOOTH receivers in the [Device List].
settings in the options menu while
transmitting sound.
content protection.
be delayed compared to playback on the
system according to the characteristics of
BLUETOOTH wireless technology.
HDMI OUT (ARC) jack when a BLUETOOTH
receiver is successfully connected to the
system.

Publicité

Table des Matières
loading

Table des Matières