Network Functions; Connecting To A Wired; Network - Sony HT-RT5 Manuel D'instructions

Network Functions

Connecting to a Wired

Network

Connecting the System to the
Network Using a LAN Cable
The following illustration is an example
configuration of the network.
We recommend a wired connection for
stable network functioning.
LAN cable
(not
supplied)
LAN cable
(not
supplied)
Server
Tip
• We recommend that you use a shielded
straight interface cable (LAN cable).
16
US
Internet
Modem
Router
Setting up a Wired Network
Connection
You can set up a wired network
connection by the following procedure.
1
Press HOME.
The home menu appears on the TV
screen.
2
Select [Setup] -
Settings] from the home menu.
3
Select [Internet Settings].
4
Select [Wired Setup].
The screen for selecting the IP
address acquisition method appears
on the TV screen.
5
Select [Auto].
The system starts connecting to the
network.
The confirmation screen appears.
6
Press / to browse information,
and then press .
7
Select [Save & Connect].
The system starts connecting to the
network. For details, refer to the
messages that appear on the TV
screen.
If using a fixed IP address
Select [Custom] in step 5 and follow the
on-screen instructions.
Tip
• See [Network Connection Status] when
checking the network connection status
(page 29).
[Network