Nice SD Série Instructions Et Avertissements Pour L'installation Et L'utilisation page 15

TRANSPORT / STORAGE / DISPOSAL
The gearmotor is totally assembled and wired, ready for the
connection. To avoid any damages it is to be transported, and if
necessary stored, inside the packaging provided for this purpose or
another that is similar with equal characteristics.
For disposal, it is necessary to separate
− metals
− plastic elements
− electrical components
− lubricants.
and declaration of incorporation of "partly-completed machinery"
Declaration in accordance with Directives: 2014/30/EU (EMC); 2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to the declaration at the last available version of the document filed in the offices
of Nice S.p.A. prior to the printing of this manual. This text has been adapted to meet editorial requirements. A copy of the original
declaration may be requested from Nice S.p.A. (TV) Italy
Declaration number:
Name of manufacturer:
Address:
Person authorized to provide
technical documentation:
Address:
Product type:
Model / Type :
Accessories:
The undersigned Roberto Griffa, as Chief Executive Officer, hereby declares under his own responsibility that the product identified above
complies with the provisions of the following directives:
• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the
laws of the Member States relating to electromagnetic compatibility (recast), in accordance with the following harmonised standards:
EN 61000­6­2:2005, EN 61000­6­4:2007+A1:2011
The product also complies with the following directive in accordance with the requirements for partly­completed machinery:
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 related to machinery, and which
amends the directive 95/16/EC (recast):
• I declare that the pertinent technical documentation has been prepared in accordance with Annex VII B to Directive 2006/42/EC and that the
following essential requirements have been met: 1.1.1­ 1.1.2­ 1.1.3­ 1.2.1­1.2.6­ 1.5.1­1.5.2­ 1.5.5­ 1.5.6­ 1.5.7­ 1.5.8­ 1.5.10­ 1.5.11
• The manufacturer agrees to send the national authorities pertinent information on the "partly­completed machinery" in response to a motivated
request without affecting its intellectual property rights.
• If the "partly­completed machinery" is operated in a European country with an official language other than the language used in this declaration, the
importer must associate a translation with this declaration.
• The "partly­completed machinery" must not be operated until the final machine in which it is to be incorporated is declared to conform to the
provisions of Directive 2006/42/EC, if applicable to it.
The product also complies with the following standards: EN 60335­1:2012+A11:2014, EN 60335­2­103:2015
The parts of the product which are subject to the following standards comply with them:
EN 13241­1:2003+A2:2016, EN 12445:2000, EN 12453:2000, EN 12978:2003+A1:2009
Oderzo, 15 March 2017
Some of our motors and control units
are tested by TÜV Nord
We specifically clarify that we neither carry out tests nor are we willing
to approve any spare parts and/or accessories not supplied by us.
The assembly and/or the use of products of this type could therefore
compromise any predefined characteristics at the construction
design level, or reflect on safety.
NICE declines all liability and disclaims any warranty whatsoever
for damages, if any, caused by non­original spare parts and/or
accessories.
Defects that cannot be remedied internally are to be eliminated only
by the Door manufacturer or another specialised Company, from
which it is possible to also request any necessary spare parts.
EC declaration of conformity
436/SW­SD
NICE S.p.A.
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
NICE S.p.A.
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Electro­mechanical gearmotor for SW­SD series industrial sectional doors
SW­70­20, SW­90­24, SD­100­24, SD­120­20, SD­140­20
TECHNICAL ASSISTANCE / SPARE PARTS /
ACCESSORIES
Rev.: 4
Ing. Roberto Griffa (Chief Executive Officer)
Language: EN
English – 13