Installing This Product Installation Requirements; Contents - American Standard SpaLet Advanced Clean 2.5 Manuel D'installation

3. Installing This Product
Installation Requirements
Before installing this product, ensure that each of the following installation
requirements are met.

Contents

Remove the parts from the box and make sure all the parts in the parts list (below) are present. Inspect
the parts carefully to make sure they are in good condition.
If any part is damaged or missing, do not install this product. Contact a customer service representative
for the part(s) you need.
The following parts are included:
• Seat unit (with heated toilet seat, toilet seat lid and power cord)
• Mounting plate
• Manual
• Mounting bolts, brackets, and bushings (2 pieces each)
• Seat unit water supply hose (with 1 clip and 1 washer)
(This plate attaches to the seat unit.)
Mounting plate
Mounting bolt
Bracket
Bushing
Seat unit
*Remote control unit and bracket are
packed in the box.
Remote control unit
For remote control unit
Batteries (2)
Manual
Water supply hose
(w/ T-junction)
Plastic
Clip
Clip
6 - EN -
• Remote control
• Bracket
• Batteries
• Wood screw
• Plastic anchors
Bracket
Wood
screws
Plastic
anchors