Specifications - American Standard SpaLet Advanced Clean 2.5 Manuel D'installation

Specifications

Product Type
Product code
Rated Voltage
Rated Power
Inlet Water
Pressure Range
Ambient Temperature Range
Product Dimension
Water Inlet Type
Heating Type
Rear Cleansing Volume
Front Cleansing Volume
Water Temperature
Cleansing
One Touch Cleansing
Oscillating
Massage
Nozzle Position
Adjustment
Heating Power
Safety Device
Dimension
Remote
Power Source
Surface Temperature
Heated
Heating Power
Seat
Safety Device
Air volume
Dryer Warm air temperature
Safety device
Deodorizing Method
Deodorizer
Deodorizing performance
One Touch Power Saving
Power
Saving
Super Power Saving
Self Cleaning Nozzle
Nozzle Manual Clean
Nozzle Shutter
Seat Heating Auto Off
Other
Sitting Sensor
Convinient
Functions
Anti-microbial Material
Soft Close Seat & Cover
Quick Detach Cover
Quick Detach Main Body
Min.
Max.
OFF (Water temperature) Low-about 90°F (32°C); Relatively Low-about 93°F
(34°C); Mid-about 97°F (36°C); Relatively High-about 100°F (38°C); High-about
Temperature sensor, temperature fuse, tilt sensor, float switch
Room temperature/ about 82°F - 104°F (28°C - 40°C) 5 adjustable levels
Approximately 104°F (40°C) - 131°F （ 55°C) (3 adjustable levels)
35 - EN -
Remote Control
8012A60GRC-020
AC120V 60Hz
1300W
9 psi (0.06MPa) Flow pressure
108 psi (0.75MPa) Hydrostatic pressure
32°F~104°F (0°C~40°C)
L 21-1/8" x W 17-3/16" x H 5-1/2"
(L 536mm*W 432mm*H 140mm)
Direct inlet flow
Instant heating
0.74~1.05 pint/min (0.35~0.5L/min)
(6 adjustment levels)
water pressure 29psi (0.2 Mpa)
0.74~1.05 pint/min (0.35~0.5L/min)
(6 adjustment levels)
water pressure 29psi (0.2 Mpa)
104°F (40°C)(6 adjustment levels)
-
•
•
(Back cleansing only)
•
230W±10%
L263mm*W32.5mm*H71mm
L10-3/8"*W1-1/4"*H2-13/16"
2*1.5V AAA batteries
57W±10%
Temperature sensor, fuse
0.2 m3/min
Temperature fuse
Absorption by activated carbon deodorizer
Auto Deodorizing : 3.8CFM (0.11m3/min)
•
(8hr)
•
•
•
•
•
Mechanical sensor
Seat(SIAA), lid, nozzle, remote control panel
•
•
•