Measure The Size Of The Toilet; Conditions For Using Water Supply Hose - American Standard SpaLet Advanced Clean 2.5 Manuel D'installation

Conditions for using Water Supply Hose

1. Measure the size of the toilet.

Depending on the size of the toilet, it may not be
possible to mount this product on it.
Make sure the toilet's dimensions are as shown in
the fi gure on the right.
2. Conditions for using water supply
hose (included)
The length of the water supply hose included with this
product is 37-3/8" (950 mm), but a length of 31-1/2"
(800 mm) from the junction fi tting to the seat unit's
water supply socket is appropriate. (Refer to the fi gure
on the right)
Installation Figure
Seal washer
Water shut
off valve
17-5/16"-19-5/8"
(440-500 mm)
Water supply hose
(w/ T junction)
Toilet Water
supply hose
8 - EN -
5-1/8" to 8-1/2"
(130 to 215 mm)
1-1/8" (30 mm)
or more