Reversing The Door - GE GYE18J Manuel D'utilisation Et Instructions D'installation

INSTALLING THE REFRIGERATOR (Cont.)

REVERSING THE DOOR

(on some models)
WARNING
leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property
damage.
IMPORTANT NOTES
When reversing doors:
• Read the instructions all the way through before
starting.
• Logo badge, handles, plugs and right hinge
cover are included inside the refrigerator (some
models).
• Place the screws by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for the
doors.
CAUTION
Lifting Hazard.
Single person lift can cause injury. Use assistance
when handling, moving or lifting the refrigerator
doors.
NOTE: When removing door, to prevent damage to
door and electronics carefully place the door in a
proper location.
NOTE: The lower door hinge pin and hinge are
keyed and must be matched correctly for the door
to self close properly. Please follow directions
carefully.
the door before lifting.
WARNING
To eliminate the risk of electric shock or injury
during installation, you must first unplug the
these instructions can result in electrical shock.
REMOVE THE REFRIGERATOR
1
DOORS
A. Tape the door shut with masking tape.
28
Installation Instructions
REMOVE THE REFRIGERATOR
1
DOORS (Cont.)
B. Remove right and left hinge covers on top of
the refrigerator using a Phillips screwdriver.
C.
ratchet driver, remove
the bolts securing
the top hinge to the
cabinet. Lift the hinge
straight up to remove.
D. Remove the tape and
tilt the fresh food door
away from the cabinet.
Lift the door off of the center hinge pin.
E. Set the fresh food door on a non-scratching
surface with the inside up.
For Models With a Freezer DRAWER:
F.
remove the hinge pin from
the hinge bracket. The hinge
pin will be used again on the
opposite side.
G.
driver, remove the bolts
securing the center hinge to the cabinet.
49-60805-1