Playing Back Music Via Bluetooth - AEG NDR 4378 DAB+ Mode D'emploi

2. Select the desired frequency with the
"Tuning..." appears in the display. The unit searches for
stations that can be received.
3. Press the / ENTER button. "MAN" appears at the right
top in the display.
4. Now you can use the /
detected stations.
5. Press the / ENTER button to quit manual search. "DAB+"
appears at the right top in the display.
NOTE:
Manual search also finds stations which only transmit data
for special services, like geo-coding data. The display
shows "Data unsupported".
Display Additional DAB Information
In DAB mode, you can display the following additional
information if broadcast by the radio station. To do so, press
the INFO / +10 button.
• This indicates the station category (e.g. Pop-Music, News
etc.).
• Displays the name of the station group (e.g. DR
Deutschland).
• Frequency of the current radio station.
• Displays the digital Audio Bit Rate.
• Displays the received signal strength.
• Display of date and time
• DLS: Short for Dynamic Label Segment. This involves
complementary data. This content may be e.g. informa-
tion about the station or the music title and artist being
played.
Save Station
1. If you have found the desired station, hold down the
PRE / MEM / PLAY MODE button. The first preset location
appears on the display. When the preset location is
empty, (Empty) is displayed.
2. For choosing the memory position, press
3. Press / ENTER to save the settings.
Select a Preset Station
1. Press the PRE / MEM / PLAY MODE button.
2. Press the / buttons to choose a memory position.
3. Confirm your selection with the / ENTER button.

Playing back Music via Bluetooth

Bluetooth involves a technology for wireless radio connection
of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
NDR4378DAB+_IM
/ buttons.
buttons to go through the
/ buttons.
This device offers you the possibility to use a Bluetooth-en-
abled device. The functional radius is limited to approx. 15
metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on Devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the operation
manual of your player.
2. Select the BT mode using the FUNCTION button. The
control lamp BT will blink blue. This signalizes that the
device is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG NDR 4378 DAB+"
will show in your player as a selection.
NOTE:
• Only one playback device can be connected with
the device at one time. If the device is already
connected with another playback device, the device
will not appear in the BT selection menu.
• To disconnect an existing Bluetooth connection,
keep the / SCAN button pressed down. The BT
control lamp flashes blue.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
After successful pairing, the BT control lamp lights up blue.
For the further procedure, please refer to the user manual of
the playback unit. If possible, adjust the volume of the exter-
nal unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect
the devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
English
43
06.04.16