Installation - ZANKER ZKF680 Notice D'utilisation

If there is a fault, first try to find a solution to the prob-
lem yourself. If you cannot find a solution to the prob-
lem yourself, speak your dealer or the local Service
Force Centre.
If you operated the appliance incorrectly, or the
installation was not carried out by a registered en-
gineer, the visit from the customer service technician or
dealer may not take place free of charge, even during
the warranty period.
These data are necessary to help you quickly and
correctly. These data are available on the supplied
rating plate.
• Model description .................
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
Stick it on Guarantee Card and send this part
1
Stick it on Guarantee Card and keep this part
2

Installation

Warning! Refer to the Safety chapters.
Warning! The following instructions about
installation, connection and maintenance must be
carried out by qualified personnel in compliance with
standards and local regulations in force.
Gas Connection
It is necessary that the connection to the gas mains are
carried out by means of an AGB tap. Choose fixed con-
nections or use a flexible pipe in AGB (stainless steel)
in compliance with the regulation in force. If you use
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are available at
Service Force Centre and approved spare parts shops.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
3
MOD.
PROD.NO.
0049 SER.NO.
Stick it on instruction booklet
3
flexible metallic pipes, be careful they do not come in
touch with mobile parts or they are not squeezed. Also
be careful when the hob is put together with an oven.
The connection must be done according to regulation
NBN D 5I.003.
TYPE
230V-50Hz
IP20
21