Product Description; Daily Use - ZANKER ZKF680 Notice D'utilisation

Product description

Cooking surface layout
Control knobs
Symbol

Daily use

Warning! Refer to the Safety chapters.
Ignition of the burner
Warning! Be very careful when you use open fire
in kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1. Push the control knob down and turn it counter-
clockwise to the maximum position (
2. Keep the control knob pushed for approximately 5
seconds; this will let thermocouple to warm up. If
not, the gas supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not light, check
if the crown and its cap are in correct positions.
1 2
4 3
Description
no gas supply / off posi-
tion
Semi-rapid burner
1
Triple Crown burner
2
Auxiliary burner
3
Control knobs
4
Symbol
).
Description
ignition position / maxi-
mum gas supply
minimum gas supply
A
B
C
D
17