Tilt Sensor; Technical Data - Dometic SPX1200I Instructions De Montage

CoolAir SPX1200I
7.4 P.05: Tilt sensor
The electronics of the system prevents that the system is switched on when the
vehicle is parked at a slope. Since some vehicles' roof already is tilted, the tilt
sensor has to calibrated to the zero setting before first use.
➤ Park the vehicle on a level place.
➤ Switch to configuration mode (chapter "Entering and exiting configuration
mode" on page 13).
✓ The display shows "P.01" and the symbol
➤ Press the
✓ The display shows "P.05".
➤ Press the
✓ The code for the current setting is displayed.
➤ Use the
➤ Press the
✓ The set value is saved and is then applied when the system is restarted.
✓ You are then returned to the menu and can select another menu item by
pressing the
8

Technical data

Cooling capacity:
Rated input voltage:
Input voltage range:
Operating temperature range:
Current consumption:
Low-voltage cut-off:
Dimensions (W x H x D):
Weight:
Inspection/certification:
EN
or button to select the menu item P.05.
button to change the setting.
or button to select "1".
button to save the setting.
or button.
CoolAir SPX1200 parking cooler
with SPX1200I rear panel evaporator unit
1200 W
24 Vg
20 Vg – 30 Vg
+5 to +52 °C
12 – 22 A
Configurable
Condenser unit 346 x 560 x 156 mm
Evaporator unit 648 x 278 x 144 mm
Evaporator unit 15 kg
(including connection lines)
Condenser unit 21 kg (without fastening frame)
Technical data
flashes.
15