Selecting Audio Source; Listening To Music Via Bluetooth; Setting The Volume; Setting The Sound Effect - Medion LIFE P64633 Mode D'emploi

7.2. Selecting audio source

You set the desired audio source using the AUX IN,
LINE IN and OPTICAL buttons on the remote control or by repeatedly pressing
the button on the soundbase.
The selection is indicated by the colour of the operating LED on the front of the
device.
AUX IN
Green Blue

7.2.1. Listening to music via Bluetooth

If you have connected the soundbase to a device that supports A2DP (Advanced
Audio Distribution Profile) and AVRCP (Audio Video Remote Control Profile), the
soundbase is used as the output medium and the audio signals are output solely by
the soundbase.
NOTICE
If you have connected the soundbase to your Bluetooth-enabled mobile
phone, music playback is interrupted when there is an incoming call and
is resumed only when the call has ended.

7.3. Setting the volume

Use the / buttons on the soundbase or on the remote control to adjust the
volume to the required level:
• + Increase volume
• – Reduce volume
The volume can be turned off completely by pressing the
remote control.
 Press the MUTE button again to restore the audio output.
7.4. Setting the sound eff ect
Use the TREBLE+/– button on the remote control to adjust the treble level.
• + Increase the treble
• – Reduce the treble
Use the BASS+/– button on the remote control to adjust the bass level.
• + Increase the bass
• – Reduce the bass
7.5. Switching off the soundbase
 Press the
button on the remote control or on the soundbase to switch the
soundbase to the standby state.
With the device in the standby state, the operating LED lights up red.
98 of 102
HDMI COAXIAL
Light blue Yellow
, HDMI, COAXIAL,
LINE IN
OPTICAL
Pink White
MUTE button on the