Switching On The Soundbar; Selecting The Audio Source; Setting The Volume - Medion LIFE E64126 Mode D'emploi

12. Switching On the Soundbar

 Switch the Soundbar on, either by pressing its
trol.
 Switch on your audio device, select a medium volume and start playing the
sound.
If a TV or an external device is connected via the AUX or HDMI sockets,
the Soundbar will switch on automatically, a few seconds after the tele-
vision or the external device is switched on.
If the TV or the external device is disconnected or switched off, the
Soundbar will switch off automatically after approximately 15 minutes.
If the volume of the television or external devices is too low, you should
also switch off the Soundbar after approximately 15 minutes (but only if
the devices are connected via AUX).

13. Selecting the Audio Source

Press the SOURCE button on the Soundbar or press the OPTICAL, AUX, OP or
HDMI ARC button on the remote control to select the audio source you want: AUX,
BT, HDMI ARC or Optical.
Coloured LED operating displays show which operating mode has been selected:
Operating dis-
play
Red
Green
Orange
Blue

14. Setting the Volume

Press the VOL +/VOL- buttons on the Soundbar or on the remote control to set the
volume:
+ increase volume
– reduce volume
Use the BASS+/BASS - buttons to regulate the bass volume.
Press the MUTE button on the remote control to mute the volume.
 Press the MUTE button again to restore the sound.
Flashes
HDMI
button, or with the remote con-
Shines
Standby
AUX
Optical
Bluetooth
DE
FR
NL
EN
ES
IT
119