Medion LIFE P64633 Mode D'emploi page 95

To connect a Bluetooth-compatible audio output device, follow these steps:
 Switch on the soundbase by pressing the
by pressing the
 Now press the
control.
The device is in discovery mode. The LED flashes blue.
 Switch on the Bluetooth functionality on your audio output device and activate
the discovery mode in order to pair the devices with one another.
NOTICE
If required, please refer to the corresponding operating instructions for
information on the Bluetooth functionality of your audio output device.
The device name of the soundbase, MD 84467, is displayed as soon as the signal
has been found.
 If you are asked for a password, enter 0000.
The pairing process for both devices is complete when an acoustic signal is emitted
and the LED constantly glows blue.
6.3.7. NFC-enabled output device
The NFC (Near Field Communication) function enables the wireless reception of
audio signals from an NFC-enabled audio output device within close proximity.
The soundbase is switched on.
 Switch on the NFC function and the Bluetooth function on your smart device.
The device is in discovery mode.
 Hold your NFC-enabled smart device near the area marked NFC on the
soundbase.
 Confirm the query CONNECTING WITH MD 84467 on your smart
device with YES. Wait 5 to 8 seconds before removing your smart device from
the soundbase.
The pairing process for both devices is complete when a double acoustic signal is
emitted and the operating LED constantly glows blue.
 Select a medium volume and start playback on your smart device.
96 of 102
button on the remote control.
button on the soundbase or the
button on the side of the device or
button on the remote