Ce Conformity Statement - EUROM Cool Silent 90 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

 Are windows or doors open? Shut them.

 Are there too many people in the room? They produce heat!

 Is the space too big?

 Is there an object in the room that is generating (a great deal of) heat? Switch it off or remove

it.

 Is the filter dusty or covered in dirt? Clean it.

 Is the air inlet or outlet (hose) blocked? Make sure there is free air flow.

The unit is making noise and vibrates

 Is the surface underneath the machine sturdy and even?

 Is the filter dusty or covered in dirt? Clean it.

 The flow of coolant in the unit also produces a little noise. This is perfectly normal.

The unit switches itself off

 The overheating safeguard may have switched the unit off. See 'Safety'.

Error messages

Code P1 : Water reservoir is full – empty it – see description

Code E1 : Fault in the temperature sensor.

Code E2 : Fault in the temperature sensor of the evaporator

Code E3 : Fault in the temperature sensor of the condenser

Code E4 : Fault in the communication with the display panel

Code E7 : Fault in the zero-axis crossing (zerocrossing ?????)

Attention! If one of the abovementioned faults occurs, switch the device off and check whether

the device is blocked or if there is a similar problem.

Start the device again. If the error message is still displayed, switch the device off and pull the

plug out of the socket. Contact your dealer or a qualified maintenance engineer for inspection

and repairs.

NEVER ATTEMPT TO REPAIR THE DEVICE YOURSELF!

REMOVAL

In the EU this symbol indicates that this product may not be disposed of as

ordinary household waste. Old equipment contains valuable materials, suitable

for recycling. These materials should be made suitable for reuse in order to

prevent any adverse effects to health and the environment caused by

unregulated waste collection. Therefore, please make sure that you bring old

equipment to a designated collection point. Alternatively, contact the original

supplier, who can make sure that as many of the components as possible can

be recycled.