Maintenance Notes - Rehau RAUTOOL H2 Mode D'emploi

rautool h2

maintenance notes

Regular inspection:
- Always keep jaw sets, expanding tools and cylinders clean .
When soiled, clean them with a brush and oil them . Then
store the dry tool .
- Before every use, check the jaw sets, expanding tools and
the tool for damage or visible wear . Damaged tools must not
be used . They should be sent right away to an authorized
service center for repair .
Storage :
Never store a wet tool! Dry the tool and grease it . Then store
the tool dry .
Repairs:
Risk of accident!
Do not yourself perform any repairs on the tool .
Repairs should only be carried out by an authorized service
center .
- Make sure that on compression the jaw sets close fully and
the compression sleeve is inserted up to the fitting collar .
- Regularly grease the expanding tool tapers . Do not apply any
grease to the expanding segments! Should excess grease
reach the expanding segments, the segments must be tho-
roughly cleaned (for example with cleaner's naphtha) and
then dried .
To extend the service life of the tool, as a matter of principle
store the tool in its final position (extended cylinder and jaw
sets) .
31