Scope Of Supply - Lenze Global Drive 8200 vector Instructions De Montage

Scope of supply

Position Description
0
8200 vector frequency inverter
1
Label (required for mounting in accordance with UL)
2
Support for standard fixing
3
EMC shield sheet with shield clips for the motor cable and for the motor temperature
monitoring feed cable
4
2−pole terminal strip for motor PE and motor shield at X2.1
5
EMC shield sheet with fixing screws and shield clamp for shielded control cables
6
Plug connector 2*13 pole for function modules on FIF interface
X1.1 Terminal strip for mains connection, DC supply (3 − 7 pole, according to device type)
X1.2 Terminal strip for relay output
X2.1 Terminal strip for motor connection, connection of brake resistor (optional)
X2.2 Terminal strip for PTC connection or thermal contact (NC contact) of the motor
Mounting instructions
Interfaces and displays
Position Description

2 light−emitting diodes
(red, green)
‚
AIF interface
(automation interface)
ƒ
FIF interface
(function interface)
84
Function
Status display
Slot for communication modules
E82ZBC keypad, XT EMZ9371BC keypad
Fieldbus communication module type EMF21xx...,
e.g. PROFIBUS−DP EMF2133IB
With cover for operation without function modules
Or slot for function modules
Standard I/O PT E82ZAFSC010
Application I/O PT E82ZAFAC010
Fieldbus function modules type E82ZAFxC...,
e.g. PROFIBUS−DP PT E82ZAFPC010
l
^
104
^
104
^
119
^
119
^
119
^
130
^
120
^
121
^
127
^
126
^
154
^
132
^
130
EDK82EV222 DE/EN/FR 13.0