Audiovox VME 9415 Mode D'emploi page 92

Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor
is retracted inside the unit, the TFT monitor automatically moves into the viewing
position and Camera mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back inside unit.
Setting
Color Select
Color Scan
Color Custom
Camera In
Video Input (Input circuitry
auto detects the video
signal from the Aux In
source).
TFT Auto Open
Options Function
White This feature allows the user to select eight
pre-defined LED colors for the front panel
Red
button illumination.
Blue
Green
Yellow
Purple
AquaBlue
SkyBlue
Custom
On The unit will "scan" the color spectrum to
allow the user to select a color.
Off
Red This feature allows the user to tune the
RGB colors of the LEDs to obtain an exact
Green
match for their vehicle.
Blue
Normal Reverse the camera image as if looking
through a rear-view mirror.
Mirror
NTSC The color signals are output in the
standard NTSC format.
PAL The color signals are output in the
standard PAL format.
Auto The color signal output is switched
automatically based on the current video
input signal - NTSC or PAL.
On The TFT panel automatically opens when
the unit is turned on.
Off You must press the OPEN button to open
the TFT panel.
Manual When the ignition is turned OFF, the
TFT panel DOES NOT retract if it was
previously out.
92