Honsel RivSmart eBZ ZERO S Manuel D'utilisation D'origine page 47

DMSD LITE / DMSD HR
As standard the riveter (P) has a force/stroke mon-
itoring system (DMSD Lite) and is therefore able to
document the riveting operations performed. For
this the SD card (R) must be in the riveter.
Attention: The SD card (R) must not be inserted
into or removed from the riveter as long as the bat-
tery (F) is installed. The SD card could otherwise
be destroyed and with it your data!
The difference between DMSD Lite and DMSD HR
lies in the measuring methods for the force and
stroke, and hence in the precision.
The precision of the force measurement with
DMSD Lite is +/- 20 % and for the stroke measure-
ment +/- 12 %. Depending on the application and
rivet, you can change the tolerance when setting
up the DMSD.
If you have to work with rivets of different length in
a part or you have different clamping forces when
working in Job and DMSD mode, you have to set
the stroke tolerance (and possibly also the force
tolerance) higher (100 %).
WIFI
The WiFi function allows you to connect the riveter
(P) to your smartphone. You can manage all your
riveters (P) in the app, but can only connect to one
riveter at a time.
A router link is in preparation.
An interface to your company network can be
programmed individually.
SMARTPHONE OS
The HONSEL Tool app is available for the following
terminals and operating systems:
• iPhone 5 and higher, iPad 2 and higher, iOS from
Version 8.2 and higher and
• Android from Version 4.0 and higher.
English | 47