Honsel RivSmart eBZ ZERO S Manuel D'utilisation D'origine page 30

THE OLED DISPLAY AND KEYPAD
WiFi symbol
appears when
WiFi is active
Status lines
Time
Date
Function
symbols
Arrow keys:
Left / right to
navigate to the
menu items
Up / down to
change the
values
SD CARD
Leave the SD card (R) in the riveter (P)
at all times. The SD card (R) must not be
inserted into or removed from the riveter
(P) as long as the battery (F) is installed!
The SD card (R) could otherwise be destroyed and
with it your data!
There are 2 file types on the SD card supplied in
the RivSmart. One or more CSV files and a TXT
file.
The process stamp of the RivSmart is stored in
the CSV file. A CSV file has a maximum storage
capacity of 12210 process stamps. If more than
30 | English
SD card symbol
appears when an SD
card is inserted
12210 process stamps are saved to the SD card,
a new CSV file with consecutive number will be
created.
The following data are stored in the CSV file: serial
number, date, time, counter, error message, DMSD
evaluation and the job.
The TXT file forms part of the file system and is
important for writing the process stamp to the SD
card. Please do not delete this file!
Battery
indicates the
battery charge
state
Info lines
for states,
results and
warnings
OK key:
1. Hold for
2 seconds
to call up the
Setup menu
2. Press briefly
to switch to the
next menu page
3. Cancel
messages and
warnings