Honsel RivSmart eBZ ZERO S Manuel D'utilisation D'origine page 37

The current time and date can be set in the "Date &
Time" screen.
When you use the app, the RivSmart uses the time
set on your smartphone / tablet.
Confirm your selection with the "OK key" (T) or
quit the setup menu by holding the "OK key" (T)
depressed (>2 s).
The various light functions can be set in the "Light"
screen.
1. Automatic illumination of the riveting point with
standby after approx. 30 sec.
2. Torch function, switches off after approx. 180
sec.
The times can be set individually in the app.
Confirm your selection with the "OK key" (T) or
quit the setup menu by holding the "OK key" (T)
depressed (>2 s).
The WiFi function can be activated or deactivated
in the "WiFi" screen.
WiFi: ON / OFF
The WiFi SSID is displayed here again for informa-
tion.
Confirm your selection with the "OK key" (T) or
quit the setup menu by holding the "OK key" (T)
depressed (>2 s).
English | 37