Honsel RivSmart eBZ ZERO S Manuel D'utilisation D'origine page 41

The warning message "Mandrel Cup Full" indicates
that the stud collector needs to be emptied.
Unscrew the stud collector and empty it. The coun-
ter is automatically reset to "0". Screw on the stud
collector again.
The riveter is then ready for operation. Acknowl-
edgement with the "OK key" (T) is not necessary in
this case.
The standard setting is 100 rivet studs. This setting
can be changed in the app – Caution! Overfilling
can result in damage to the riveter.
The warning message "Service Jaws" indicates
that the clamping jaws need to be serviced or
replaced.
The settings are made in the app, depending on
the stud material of the rivet.
Acknowledge the error message by pressing the
"OK key" (T) and carry out the service as de-
scribed in the manual.
If riveting can no longer be performed in one
stroke, the clamping jaws need to be replaced.
When the warning message "Service Tool" ap-
pears, your RivSmart has set 300,000 rivets.
Acknowledge the error message by pressing the
"OK key" (T).
The RivSmart should now be sent to a service
centre for inspection.
You can continue to work, but the service message
appears every time you attach the battery.
Note the failure to have the inspection carried out
can result in damage to the riveter and loss of
warranty claims.
English | 41