Connection Instructions - Sony MEX-100NV Mode D'emploi

7890_GB.book Seite 135 Montag, 1. Juli 2002 1:20 13
Antenna
socket
Warning!
Terminal 30 and terminal 15 must always be connected
C o n n e c t i o n i n s t r u c t i o n s
separately, otherwise excessive current consumption occurs when
the unit is switched off. Connection socket A is not the same for all
vehicle types. Therefore, always measure voltages before installa-
tion.
Socket A
1 Speed signal (GAL)
2 Reversing lamp signal
3 Telephone mute / clearing function
4 Permanent positive (terminal 30)
5 Control output for automatic antenna/amplifier
6 Illumination (terminal 58)
7 Switched positive (terminal 15)
8 Earth (terminal 31)
Socket B
1 Loudspeaker rear right +
2 Loudspeaker rear right -
3 Loudspeaker front right +
4 Loudspeaker front right -
5 Loudspeaker front left +

Connection instructions

C2 C3
C1
6 Loudspeaker front left -
7 Loudspeaker rear left +
8 Loudspeaker rear left -
Socket C1
1 LineOut rear left
2 LineOut rear right
3 AF earth
4 LineOut front left
5 LineOut front right
6 Subwoofer LineOut
Socket C2
7-12 Special connection for Sony optional CD changer
CDX-T6NV
Socket C3
13 AF telephone input
14 Earth - telephone input
15-17 Special connection for Sony optional CD changer
CDX-T6NV
18 CD AF earth (AUX)
19 CD AF left (AUX)
20 CD AF right (AUX)
B
A
GPS antenna
135