Setting Reception Optimisation (M/S); Setting Navigation Announcements (Nav) - Sony MEX-100NV Mode D'emploi

7890_GB.book Seite 131 Montag, 1. Juli 2002 1:20 13

Setting reception optimisation (M/S)

Three different reception optimisation settings can be select-
ed in order to suppress reception-dependent interference and
reflections.
Request the user menu. By pressing the multifunction button
select either ,
M/S Stereo Mono
M / S : S t e r e o
Gal Tel Col Lcd M/S Nav _>
• - Setting for normal operation - i.e., the system
Auto
switches from stereo to mono and back depending upon
reception location (provides the optimum setting for al-
most all reception areas).
• Stereo - Setting for exceptional reception conditions -
i.e. the unit is constantly set to stereo.
• - Setting for reception conditions in which reflec-
Mono
tions constantly occur - i.e., the unit is set constantly to
mono.
The setting is effective immediately and is also retained on
switching off.

Setting navigation announcements (Nav)

With this function you can select how you wish to hear navi-
gation announcements.
•
only
switched off and only navigation announcements are
or .
Auto
heard.
•
mixed
being listened to is decreased. The navigation announce-
ment is set to the same volume level as the previously
heard audio source but still adjustable within a range of +/
-6 dB. If the audio source volume is then changed, the
navigation announcement volume is adjusted accordingly.
•
independ
navigation announcement can be set to various levels.
For selection, request user menu. Using the multifunction but-
ton
N A V : m i x e d
Gal Tel Col Lcd M/S
The setting is stored automatically.
- The audio source currently being listened to is
- The volume level of the audio source currently
- The audio source being listened to and the
select either only , mixed or independ
Nav
Nav _>
User menu
.
131