Activating/Quitting The Tp Menu; Switching Tp On/Off - Sony MEX-100NV Mode D'emploi

7890_GB.book Seite 120 Montag, 1. Juli 2002 1:20 13
Radio mode
When TMC is switched on:
• With TMC, the unit is capable of selecting a suitable
traffic programme transmitter automatically. If possible, a
TMC station is selected as the traffic programme
transmitter. The selected TMC station usually offers the
best traffic information for the region in which you are
travelling. If no TMC station is available, the traffic
programme transmitter with the strongest signal is
selected.
If an RDS transmitter is equipped with a traffic programme,
this is indicated on the display by
An inverse TP appears on the display to indicate that the
traffic programme is active.

Activating/quitting the TP menu

Activating: Press TP (traffic announcements cannot be
transmitted).
T P o n
Tp Sta Vol Tmc
Press the multifunction button.
Tp
Quitting: Press TP or the TP menu will be automatically
terminated after 8 seconds without actuation.
120

Switching TP on/off

In all modes and wavebands, TP can be switched on/off by
pressing TP for more than 2 seconds.
TP can also be switched on/off in the TP - menu.
Switching on: To switch on TP in the TP menu, press
the
displayed.
T P o n
Tp
.
TP
Switching off: To switch off TP in the TP menu, press the
Tp
displayed.
T P o f f
Tp
TP is switched off after returning to normal display.
multifunction button repeatedly until
Tp
Sta Vol Tmc
multifunction button repeatedly until
Sta Vol Tmc
is
TP on
is
TP o ff