Interrupting Tp Announcements; Tp Announcement Volume; Switching Tmc On/Off - Sony MEX-100NV Mode D'emploi

7890_GB.book Seite 122 Montag, 1. Juli 2002 1:20 13
Radio mode

Interrupting TP announcements

During a TP announcement, briefly press TP.
The announcement currently being broadcast will be
interrupted and the system will automatically return to the
previously selected mode.

TP announcement volume

Activate the TP menu. Press the
T P V : 1
Tp Sta Vol Tmc
Using the SELECT control, four different settings (
be selected. This means that the volume can be raised to a
fixed value according to the setting.
• Setting - no volume increase
0
• Setting - slight volume increase
1
• Setting 2 - medium volume increase
• Setting - large volume increase
3
122

Switching TMC on/off

Note:
Activate the TP menu.
multifunction button.
Vol
T M C o n
Tp Sta Vol
Switching on:
Press the
on
- ) can
0 3
If TMC is switched on, a traffic programme transmitter
cannot be selected freely. A TMC station is selected by the
unit, provided one can be received. This transmitter then
corresponds to the traffic programme transmitter.
Switching off:
Press the
off
If TMC is switched off, a traffic programme transmitter can
be selected freely.
Note:
You can find further information on TMC under
"Dynamic navigation with TMC" auf Seite 98.
Tmc
multifunction button repeatedly until
Tmc
is displayed.
multifunction button repeatedly until
Tmc
is displayed.
Dynamic navigation functions (dynamic route,
traffic information) cannot be selected or called
up.
TMC
TMC