Cleaning The Sensors; Changing The Batteries In The Remote Control; Replacing The Rechargeable Battery - Miele RX1 - 4814 Mode D'emploi

Robot aspirateur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en

Cleaning the sensors

^ Carefully clean the sensors on the
side and the bottom of the robot
vacuum cleaner using a dry cotton
wool bud.
Changing the batteries in the remote
control
The remote control requires two AAA
(1.5 V) batteries.
^ Remove the battery compartment
cover.
^ Replace the batteries making sure
the polarity is correct.

Replacing the rechargeable battery

Replace it with an original Miele
lithium-ion rechargeable battery for
your Scout RX1.
^ Place the robot vacuum cleaner
upside down on a level, clean
surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as
it can come loose.
22
^ Unscrew the cover of the rechargeable
battery compartment on both sides
with a cross-headed screwdriver.
^ Carefully remove the rechargeable
battery, pressing the lug on the
contact to release it.
^ Insert the new rechargeable battery.
^ Replace the cover of the rechargeable
battery compartment.
^ Dispose of the old rechargeable
battery in your recycling bin.
Battery packs may be considered
hazardous waste by your local
municipality. Please dispose of them
responsibly and in accordance with
your local recycling program.

Publicité

Table des Matières
loading

Table des Matières