Miele RX1 - 4814 Mode D'emploi page 16

en
Option 1 (Remote control)
^ Press the button for the vacuuming
mode you want. The corresponding
vacuuming mode symbol will light up
in the display.
^ To start vacuuming, press the ~ II
button on the remote control or the
~ II sensor in the display.
Option 2 (Display)
^ Press the Y sensor repeatedly until
the symbol for the vacuuming mode
you want lights up.
^ To start vacuuming, press the ~ II
button on the remote control or the
~ II sensor in the display.
16
Setting the timer
(only possible if the clock has been set)
If you would like the robot vacuum
cleaner to start at the same time every
day, you can save the start time and
vacuuming mode you want to memory.
You can also use the robot vacuum
cleaner to vacuum in the dark.
However, please be aware that
vacuuming may be less thorough. The
camera needs light to enable it to
navigate without restriction.
Use the remote control to set the timer.
^ Press the Timer button for at least
three seconds.
The Timer m and the hour indicators
will flash in the display.
^ Press the + or - direction button to set
the hour you want.
^ Press the OK button to confirm your
selection.
The Timer m and minutes indicators will
flash in the display.