Technician Menu - SciCan HydriM L110w Manuel De L'utilisateur

5. instructions for Use
Set Drying Time
P2 Wash
10min
Default 10min
User Menu
Set Drying Time
Error History
Cycle Count
User Menu
Set Drying Time
Error History
Cycle Count

5.8 Technician Menu

Technician
This menu is only available to authorized technicians.
User Menu – Set drying Time
The drying time for P2 and P3 can be set independently.
P1 does not have a drying cycle.
Touch the cycle for which you want to set the drying time.
Use the up and down arrows to select the desired drying
time. Touch default if you wish to return to the factory default.
Use the back arrow to return to the previous screen.
Error History
Printout 1 Page 1/2
HYDRIM L110w
Unit No. : 00
Cycle Number: 000032
START 26 C 00:00:02
Cycle Count
2
13
User Menu – Error History
This allows the user to see the last
three errors. Press the down arrow to
move to the next page / error. Press the
X in the lower left hand corner to clear
the error history. Press the back arrow
to move to the previous menu.
User Menu – Cycle Count
This allows the user to see how many
cycles have been run on the Hydrim.
Touch cycle count and the number of
cycles (completed and aborted) will
be displayed. This cannot be reset.
Touch the back arrow to return to the
previous menu.