■ Single measurement
Pressing the PWR button once starts single measurement, then displays the results.
■ Continuous measurement
Press and hold down the
During measurement, the measured result is displayed consecutively while the laser irradiation mark is
blinking. If you release your finger from the button, continuous measurement stops.
Standby
When measuring a flagstick at a golf course, for example, keep targeting the
flagstick at the center of the target mark with the continuous measurement
function to minimize handshake.
to start continuous measurement up to approx. 8 seconds.
PWR button
Press PWR button once
Press and hold down the PWR button
Example of measured
distance display
Single measurement
Continuous measurement
Example of measurement
failure
En
Es
Fr
Pt
17