[First Step]; Inserting/Replacing Battery - Nikon COOLSHOT 80 i VR Manuel D'utilisation

[First step]

En ￭ Inserting/Replacing battery
Es
1. Type of battery
3V CR2 lithium battery x1
Fr

2. Inserting/Replacing battery

Pt
2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber.
The [+] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the
Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new
one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber
packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely
closed.
3. Battery level indicator
*The battery condition mark in the internal display warns when the battery needs to be replaced.
After power on, displays for 2 seconds only.
After power on, displays for 2 seconds only.
Displayed continuously.
Blinks. After blinking 3 times, automatically
powers off.
12
Display Description
Sufficient power available.
Power getting low.
Prepare to replace the battery.
Low. Battery should be replaced with a new one.
Power exhausted.
Replace the battery.