JVC KD-X360BTS Manuel D'instructions page 26

BLUETOOTH®
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver's operations
from the following devices.
KD-X360BTS: iPhone/iPod (via Bluetooth or via USB input terminal)
or Android smartphone (via Bluetooth)
KD-X260BT/KD-SX25BT: Android smartphone (via Bluetooth)
Preparation:
• Install the latest version of JVC Remote application on your device before
connecting.
• For more information, visit <http://www.jvc.net/cs/car/>.
1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
[REMOTE APP]
[SELECT] Selects the device (IOS or ANDROID) to use the application.
[IOS] [YES]: Selects iPhone/iPod to use the application via Bluetooth or connected via
USB input terminal. ; [NO]: Cancels.
If IOS is selected, select iPod BT source (or iPod USB source if your iPhone/iPod is
connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the USB
input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID] [YES]: Selects Android smartphone to use the application via Bluetooth. ;
[NO]: Cancels.
22
ENGLISH
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via
.
• If you plug in an iPhone/iPod to the USB input terminal while listening
Default: [XX]
[ANDROID LIST]* Selects the Android smartphone to use from the list.
[STATUS] Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application using the iPhone/
iPod connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]: No IOS device is connected to use the
application.
[ANDROID CONNECTED]: You are able to use the application using the
Android smartphone connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use
the application.
Listen to iPhone/iPod via Bluetooth
USB input terminal. (Page 7)
to iPod BT source, the source automatically changes to iPod USB. Press
B SRC to select iPod BT if the device is still connected via Bluetooth.
(for KD-X360BTS)